 |
HORIZONTAL ELBOW
(RADIUS TYPE) |
Horizontal Elbow (Radius Type) are used to turn ladder system on the right or on the left at 30,45,60 & 90 degree angle on the same panel. It used to connect straight ladder and other fittings. |
|
|
 |
HORIZONTAL ELBOW
(ANGLE TYPE) |
Horizontal Elbow (Angle Type) are used to turn ladder system on the right or on the left at 30,45,60 & 90 degree angle on the same panel. It used to connect straight ladder and other fittings. |
|
|
 |
HORIZONTAL TEE
(RADIUS TYPE) |
Horizontal Tee (Radius Type) is suitable for joining high flange cable ladder in three directions at 90 degrees intervals in the same plane. |
|
|
 |
HORIZONTAL TEE
(ANGLE TYPE) |
Horizontal Tee (Angle Type) is suitable for joining high flange cable ladder in three directions at 90 degrees intervals in the same plane. |
|
|
|
|
|
|
|
|
 |
HORIZONTAL CROSS
(RADIUS TYPE) |
Horizontal Cross (Radius Type) is suitable for joining straight high flange cable ladder in four directions at 90 degrees intervals in the same plane. |
|
|
 |
HORIZONTAL CROSS
(ANGLE TYPE) |
Horizontal Equal Cross (Angle Type) is suitable for joining straight high flange cable ladder in four directions at 90 degrees intervals in the same plane. |
|
|
 |
STRAIGHT REDUCER |
Straight Reducer are used for connecting bigger high flange cable ladder with smaller ones in an easy and convenient manner within the same plane. |
|
|
 |
RIGHT & LEFT HAND REDUCER |
Right & Left Hand Reducer are used for connecting bigger high flange cable ladder with smaller ones in an easy and convenient manner within the same plane. |
|
|
|
|
|
|
|
|
 |
INSIDE VERTICAL RISER (RADIUS TYPE) |
Inside Vertical Riser (Radius Type) is suitable for 90 degree corners or directional changes on a vertical plane, upwards motion. |
|
|
 |
INSIDE VERTICAL RISER
(ANGLE TYPE) |
Inside Vertical Riser (Angle Type) is suitable for 90 degree corners or directional changes on a vertical plane, upwards motion. |
|
|
 |
OUTSIDE VERTICAL RISER (RADIUS TYPE) |
Outside Vertical Riser (Radius Type) is suitable for 90 degree corners or directional changes on a vertical plane, downward motion. |
|
|
 |
OUTSIDE VERTICAL RISER (ANGLE TYPE) |
Outside Vertical Riser (Angle Type) is suitable for 90 degree corners or directional changes on a vertical plane, downward motion. |
|